This is a Korean made quality unit with a sensitive tuner and is easy to
setup and operate. It has a card slot suited for Irdeto 1 and 2 smartcard
systems. EG- Suitable for FTA, PayTV and Aurora systems as well as for all
other multicultural channels using the Irdeto CAS system. The unit is suited
for both KU and C band satellites with a range of pre-configured satellite
settings. Note : This unit is equipped with a REAL LICENCED
version of the Irdeto encryption system and has no problems activating the
smartcard and maintaining it's KEYS updates. *Non or poor compliant
satellite receivers / cams tend to suffer and fail on the activation process
and KEYS updates, such as those found on non compliant ,non licenced
cheap imports generally made in China.
The
following smartcards and PayTV systems were tested
working :
PayTV Providers smartcards on
Irdeto2 (ACS 4.1) : Optus Aurora, Foxtel, Austar, LBC Worldmedia,
CroationTV, ChileTV and Others Other smartcards tested working
: Silvercard : Using Ausgold2 (AGU12.hex) and
DS9 Goldcard : Using version GV17U_02, MoscV16 and Ghost
Gold revisions 2.21, 2.22, 2.26, 3.32 Funcard : Using
Fun 4 in 1 or Fun 6 in 1 Emerald : Using Ghost emerald
Features
:
|
Irdeto CAS Embedded |
|
Fully MPEG-2 & DVB Compliant |
|
1 Card slot suitable for Irdeto I and 2 smartcards (Allcammed
Firmware Available soon) |
|
Input Frequency 950 - 2150 MHz |
|
Supports SCPC & MCPC from C / Ku-band |
|
1 LNB Input Tuner with Loop Through IF Signal |
|
Tuner Symbol Rate : 1~45 MS/s |
|
Fast Booting & Auto Scan |
|
Quick Channel Changing Speed Less than 1 Sec. |
|
Max. 4000 Channels ( TV & Radio) Programmable |
|
User Friendly 256 Colors OSD & Easy GUI |
|
Preprogrammed Channel List Memorable |
|
Various OSD Languages supported ( korean, German, French,
Russian, Spanish, Italian, Arabic, Persian, Turkish) |
|
Supports EPG, PIG |
|
Radio Channel Background Display |
|
Favorite Channel List Programmable |
|
Master PIN Code Function & Parental Lock Function |
|
20 Steps Volume Control |
|
Automatic Detection of Forward Error Correction |
|
Automatic NTSC / PAL Detection and Simple Video Converter (NTSC
<-> PAL) |
|
Window based S/W Download Program Supported by RS232 Serial Port
|
|
Set to Set Download (Main Program, Channel Data) |
|
4:3, 16:9 Letter Box & Teletext using OSD |
|
7 Segment-4 Digit Display |
|
5 Buttons on the Front Panel (Power On/Off, Channel Up/Down,
Volume Up/Down) |
|
Various LNB Polarity Control
- DiSEqC 1.0 & 1.2 with 500mA Max. LNB
Power - 22KHz Switching Control |
|
2 SCART Output for TV & VCR |
|
3 RCA Output for Video, Audio L/R |
|
Wide PLL RF Modulator (PAL B/G, I, D/K) |
|
S/PDIF for Digital Audio | Specifications :
|
Tuner & Band Switching |
|
|
- Input Frequency: 950 - 2150MHz - Input Impedance: 75 Ohm
Unbalanced - Connector: 2 x F-Type - LNB Power Supply: 13/18V/OFF, Max.
500mA With Short Circuit Protection - 22KHz Tone: Frequency :
22?KHz Amplitude : 0.6?.2V - DiSEqC: 1.0 &
1.2 Version Compatible |
|
Demodulator |
|
|
- Waveform: QPSK - Symbol Rate: 1-45MS/s - Outer Decoder:
Reed Solomon (204,188,8) - Inner Decoder: Convolutional, Length K=7 - Code
Rate: 1/2, 2/3, 3/4, 5/6, 7/8 - SCPC and MCPC Capable |
|
Video Decoder |
|
|
- Video Decoder: MPEG-2 ISO/IEC 13818-2 - Profile Level:
MPEG-2 MP @ ML - Video Format: 4:3, 16:9 (Letterbox) - Video System: PAL
<-> NTSC Converter |
|
Audio Decoder |
|
|
- Audio Decoder: MPEG-2 Multi-channel - Audio Channel: Mono,
Dual Channel, Stereo, Joint Stereo - Volume Control: 20 Steps Level
|
|
Chip & Memory |
|
|
- CPU: 32 Bit RISC CPU - Memory : 2MB Flash (2MB
Optional) 16MB SDRAM 8KB
EEPROM |
|
Demultiplexer |
|
|
- ISO/IEC 13818-1 Compliant |
|
Serial Data Interface |
|
|
- Connector: 9-Pin D-Sub(Male) - Signal: RS-232 Max. 115200
bps |
|
Audio/Video Connectors |
|
|
- TV SCART: RGB,CVBS, Audio L/R - VCR SCART: CVBS, Audio
L/R - Audio Output: 2 X RCA Cinch (L/R) - Video Output: 1 X RCA Cinch -
Digital Audio Output: 1 X S/PDIF |
|
RF Modulator |
|
|
- Output Channel : CH 21 ~ 69 - Video Type : PAL B/G, I, D/K
|
|
Conditional Access System |
|
|
- Irdeto CAS Embedded - Smart Card Interface - ISO7816
|
|
Power Supply |
|
|
- Input Voltage: AC 95 to 240V, 50/60Hz - Type: SMPS -
Power Consumption : Max. 35W |
|
Physical Specification |
|
|
- Operating Temp.: +5캽 to +40캽 - Net Weight: 3 Kg - Dimensions: 360(W)
x 245(D) x 60(H)mm
Warranty : 3 Months Return To Base | |